Текст страницы
EN
EN
How to Use
How to Use
3. Automatically empty the dust box and wash and dry the
2. Auto mop washing
Vacuum and Mop
Mop after Vacuuming
mop pads
Note: When using the mop assembly for the first time, the robot performs the
"Vacuum and Mop" task by default.
1. Start cleaning
When cleaning, the robot will automatically return to the base
station to wash mop pads based on the mop pad cleaning
frequency specified in the app. The base station will automatically
refill the robot's water tank and the robot will resume cleanup.
After the robot finishes a cleaning task and returns to the base
station to charge, the base station will automatically empty the dust
box and then wash and dry the mop pads.
Enable the mopping after vacuuming function in the app, and the
robot will automatically remove the mop assembly on the base
station to vacuum the floor. After vacuuming is completed, the
robot will return to the base station to install the mop assembly
and the base station will automatically empty the dust box. And
then, the robot will start mopping after the main brushes and side
brush are raised.
Press the button
on the robot, or use the app to make the robot
start from the base station. Then the robot will plan the optimal
cleaning route and perform the cleaning task based on the created
map.
Vacuum Only
Enable the vacuuming function in the app, and the robot will
automatically remove the mop assembly on the base station and
start vacuuming.
Mop Only
Note:
Note:
Enable the mopping function in the app, and the robot will
automatically check if the mop assembly is installed on the base
station. If not, the robot will install the mop assembly and start
mopping after the main brushes and side brush are raised.
· If the auto-empty function is turned off in the app, the base station will not
automatically empty the dust box.
· The base station will empty the dust box according to the setting in the app.
4. Clean the used water tank
· To ensure the robot easily returns to the base station after cleaning, it is
recommended to make the robot start from the base station.
· The mop pads will be cleaned before the robot starts mopping, please wait
patiently.
· Do not move the base station, the clean water tank, the used water tank, or
the washboard filter during operation.
· Hot water cleaning can be enabled in the app for mop pad cleaning, which
applies to all modes. To prevent scalding, do not touch the water outlet
After the robot has completed its task, please clean the used water
tank to prevent any odor.
when the function is on.
17
18