Текст страницы
EN EN Routine Maintenance
Routine Maintenance
Main Brushes
Dust Bag
- Remove the dust tank cover and discard the dust bag.
- Install a new dust bag.
1. Press the brush guard clips inwards to remove the brush guard,
and then lift the brushes out of the robot.
3. With the screen-printed arrows facing upwards, insert the main
brush holder into the slots downwards in an inclined way.
Note: Pulling upwards on the handle will seal the bag to prevent the dust
and debris from accidentally falling out.
- Reinstall the dust tank cover.
- Remove the dust and debris from the filter with a dry cloth.
4. Align the front end of the brush guard with the slot, insert it
downwards in an inclined way, and then press it into place.
2. Pull out the brushes as shown in the figure. Use the provided
cleaning tool to remove any hair tangled in the brushes. After
cleaning, push the brushes firmly into the main brush holder until
they click into place.
1
Click
2
Note: Be careful while pulling out the main brushes to prevent injury.
21
22