Текст страницы
AUTOMATIC WASHING MACHINE
5. Close the drain filter cover. Wipe up any spilled water.
1
2
WATER SUPPLY FILTERS CLEANING
3
4
• Turn off the tap, disconnect the hose from the tap, and
clean the filter screen with a small brush.
• Disconnect the water supply hose from the washing
machine, pull out the filter screen with pliers, and install
it back after cleaning.
• Connect the filling hose, open the tap, and make sure
there is no water leakage.
TECHNICAL MAINTENANCE
All electronic components (plug, electric cord, compressor, etc.) must only be re-
installed in certified service centers by qualified personnel.
In the event of a malfunction, you should always contact an authorized service cent-
er, specifying the type of problem and the model of your washing machine. Unqualified
repair removes the device from warranty service. Only original spare parts can be used
to repair the device.ли.
TROUBLESHOOTING
During operation, if any malfunctions are detected that the consumer cannot elimi-
nate on their own, it is necessary to contact the service center for the repair of washing
machines.
But before contacting the repair service, read this section. This list includes the most
common cases that are not the result of poor assembly quality or poor-quality materials
used in this device.
ATTENTION! Before troubleshooting, you must disconnect the product from
the mains. Troubleshooting that is not described in this manual should only be
carried out by a qualified electrician or a competent technician.
Malfunction
Possible reason
Remedy
Start / Pause button was not
pressed
Press the Start / Pause button
Program does not start
after closing the door.
To cancel the programme, turn the Programme
Selection knob to select another programme.
Previous programme will be cancelled.
Washing machine has
switched to self protection
mode due to a supply
problem
42
USER GUIDE