Текст страницы
СТИРАЛЬНАЯ МАШИНА АВТОМАТ
СТИРАЛЬНАЯ МАШИНА АВТОМАТ
AUTOMATIC WASHING MACHINE
AUTOMATIC WASHING MACHINE
Warning!
• Make the detergent container open for natural drying after cleaning.
• Do not flush the detergent container with water directly, otherwise it may result in water leakage,
electric part or floor damage, etc.
• When the washing machine is operating, make sure the detergent container is correctly closed
CLEANING THE DRAIN PUMP FILTER
NOTE
Be careful of the hot water! The water tap must be shut off!
or less-foaming detergent suitable for machine washing properly.
• Your washing machine only can wash the fabrics suitable for machine wash.
• Your washing machine only can be connected with cold tap water.
• Please choose the commercially available household low foam detergent and clothes tendering
agent only suitable for machine wash.
• The water and electricity supply must be cut off after washing.
• The operating environment conditions of the washing machines are as follows:
1. the ambient air temperature is 0 - 40°C;
2. the relative humidity of air is below 95% (at 25°C).
• Keep your pets away from the washing machine.
• Don’t wash your carpets.
• The plug of the power line must be inserted into the three-core socket with grounding wire. Make
sure that your three-core socket is grounded in a correct and reliable way.
- Unplug the appliance from the mains before cleaning to avoid electric shock.
- Drain pump filter can filter the yarns and small foreign matters from the washing.
- Clean the filter periodically to ensure the normal operation of washing machine.
Caution!
• Make sure that valve cap and emergency drain hose are reinstalled properly, cap plates should
be inserted aligning to hole plates otherwise water may leak;
• When the appliance is in use and depending on the programme selected there can be hot
water in the pump. Never remove the pump cover during a wash cycle, always wait until the
appliance has finished the cycle, and is empty. When replacing the cover, ensure it is securely
re-tightened
CLEANING THE INLET FILTER
Warning!
• When washing a single clothes, it may easily cause great eccentricity and give alarm due to great
unbalance. Therefore it is suggested to add one or two more clothes to be washed together so
that draining can be done smoothly.
• Don’t washing the clothes touching with kerosene, gasoline, alcohol and other flammable
materials.
Washing the filter in the tap
1. Close the tap.
2. Remove the water supply hose from the tap.
3. Clean the filter.
4. Reconnect the water supply hose.
Washing start
Before washing, add the necessary amount of detergent (in the form of powder, liquid, etc.)
in detergent container and close it. When using liquid detergents, make sure that the amount is
sufficient for washing.
Cleaning the filter in the washing machine
1. Disconnect the water hose from the washing machine.
2. Remove the filter (use narrow pliers), rinse with water.
3. Clean with a brush, then reinstall the filter.
4. Connect the water hose back to the washing machine.
Before each washing
I: Pre wash detergent.
II: Main wash detergent.
: Softener
• The working condition of the washing machine should be 0-40°C. If used at temperatures below
0°C, the inlet valve and draining system may be damaged.
• If the machine is placed under condition of 0°C or less, then it should be transferred to normal
ambient temperature to ensure the water supply hose and drain hose are not frozen before use.
• Please check the labels and the explanation of using detergent before wash. Use non foaming
Warning!
Detergent only need to be added in «case I»
after selecting pre-washing.
40
41
ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ • USER GUIDE
ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ • USER GUIDE