Инструкция сварочный аппарат CAT DZ 261 PFC MIG

Operation of the Stick MMA welding method:
1. Selection of the welding method:

1) In the main interface, press the MENU key to enter the function selection interface;

2) In the function selection interface, rotate L Knob to select the Stick welding method and press
it for confirmation. Refer to Fig. 1;
2. Selection and setting of welding parameters:
1) In the main interface, press the MENU key to enter the welding parameter setting interface;

2) In the welding parameter setting interface, rotate L Knob to select the parameter as required

and rotate R Knob to set a value for the parameter, afterwards, press L Knob or R Knob for

confirmation as shown below:

Welding parameters
available by rotating L
Knob

Welding parameters
available by rotating R
Knob

Hot Start
0-10

Arc Force
0-10

3. Setting of welding voltage:

1) Press the ENTER key to enter the welding interface shown below:

2) In the welding interface, rotate L Knob to set the welding current (10 - 200 A), and then press it
for confirmation;
Operation of the TIG Lift welding method:

14