Текст страницы
ENGLISH
••
After you finish ironing, switch the iron off, wait until
it cools down completely, then open the water inlet
lid (2), turn over the iron and pour out the remain
ing water.
AUTOMATIC SWITCH-OFF
The automatic switch-off function will be activated if
your iron remains still for 8 minutes in the vertical posi
tion or 30 seconds in the horizontal position. At the
same time, you will hear 6 short sound signals, and
the power indicator (15), heating indicator (7) and the
last temperature selection indicator (16) used before
switching off will be flashing simultaneously. To exit the
mode, move the iron horizontally several times.
perature selection indicator (16) lights constantly,
you can start ironing.
••
Turn the continuous steam supply knob (3) to one of
the steam supply positions. Steam will start outgo
ing from the soleplate (13) openings.
••
After using the iron, press and hold the control
button (11) to switch the iron off, and set the con
tinuous steam supply knob (3) to the position
(steam supply is off).
••
Pull the power plug out of the mains socket and let
the iron cool down completely.
ATTENTION! If there is no constant steam supply
during operation, check the correct temperature
selection on the LED indicator (16) and the presence
of water in the tank (10).
STEAM CHAMBER CLEANING
To prolong lifetime of the iron we recommend cleaning
the steam chamber regularly.
BURST OF STEAM
The burst of steam function is useful for ironing folds
and can only be used at high ironing temperatures
«•••» or «МАХ».
••
Use the control button (11) to select the tempera
ture on the LED indicator (16) «•••» or «МАХ».
••
Turn the steam supply knob (3) to the position
.
••
Press the burst of steam button several times with a
pause of at least 5 seconds.
••
When pressing the burst of steam button (4) steam
will go out of the iron soleplate more intensively.
Note: To avoid water leakage from steam openings,
press the burst of steam button (4) with an interval no
less than 4-5 sec.
Anti-Drip SYSTEM
If you iron delicate fabrics at low temperatures. And
the temperature regime you have chosen will not be
able to provide a sufficient level of vaporization. In this
situation, unevaporated drops of boiling water can
leave traces or stains on clothes. The Anti-Drip system
blocks the water supply to the evaporator, and prevents
the appearance of water drops on the iron soleplate
and clothes. Thanks to the Anti-Drip system, even the
most delicate fabrics can be ironed perfectly without
the risk of spoiling or staining them.
VERTICAL STEAM
The vertical steaming function can only be used in
high-temperature ironing mode (in this case, the
temperature indicator (16) must be in the «МАХ»
position).
Hold the iron vertically at the distance of 10-30 cm from
the clothes and press the burst of steam button (4) with
4-5 second intervals, steam will be released from the
soleplate (13) intensively.
IMPORTANT INFORMATION: Vertical steaming is not
recommended for synthetic fabrics.
••
To avoid fabric melting, do not touch it with the iron
soleplate while steaming.
••
Never steam clothes on a person as temperature
of the released steam is very high, use a clothes
hanger or a coat rack.
••
Set the continuous steam supply knob (3) to the
position
.
••
Fill the water tank (10) up to the maximal mark «max».
••
Place the iron on its base (9).
••
Insert the power plug into the mains socket.
••
Press and hold the control button (11) to switch on.
••
Use the control button (11) to set the maximum
heating temperature of the iron soleplate «МАХ».
At the same time, the heating indicator (7) and the
MAX icon of the temperature selection indicator
(16) will start flashing simultaneously.
••
When the iron soleplate (13) heats up to the set tem
perature, the indicator (7) will light constantly, the
steam chamber can be cleaned.
••
Press and hold the control button (11) to switch the
iron off.
••
Place the iron horizontally above the kitchen sink,
set and hold the continuous steam supply knob (3)
in the position «SELF CLEAN» “self-cleaning”.
••
Boiling water and steam with scale will be released
from the iron soleplate (13) openings.
••
Slightly sway the iron back and forth until all the
water leaves the water tank (10).
••
Release the continuous steam supply knob (3) and
set it to the position
.
••
Insert the power plug into the electrical socket.
••
Press and hold the control button (11) to switch the
iron on.
••
Use the control button (11) to set the maximum
heating temperature of the iron soleplate «МАХ»,
and the heating indicator (7) will light up.
••
Wait until the remaining water evaporates from the
tank (10) through the iron soleplate (13) openings.
It will take at least 2 minutes.
••
Press and hold the control button (11) to switch the
iron off.
••
Remove the power plug from the electrical socket.
••
Place the iron on its base (9) and let it cool down
completely.
••
When the iron soleplate (13) cools down completely,
wipe it with a dry cloth.
12