Текст страницы
[Wind Noise Canceler]
This will reduce the wind noise coming into the built-in microphones while maintaining the realism.
≥Switch to Manual Mode. (l 68)
MENU
: [RECORD SETUP] # [Wind Noise Canceler] # desired setting
[Strong]:
When a strong wind is detected, this option effectively reduces the
wind noise by minimizing the low-pitched sound.
[Normal]:
This option extracts and reduces only the wind noise without
deteriorating the sound quality.
[OFF]:
Cancel the setting.
≥When [Strong] is set, you can check how effectively the wind noise is reduced with the icon
displayed on the screen. In descending order of the strength of the reduction effect,
/
/
/
is displayed.
≥When [Normal] is set,
will be displayed on the screen.
≥This function’s default setting is [Normal].
≥When switching to Intelligent Auto Mode or Intelligent Auto Plus Mode, [Wind Noise Canceler] is
set to [Strong], and the setting cannot be changed.
≥You may not see the full effect depending on the recording conditions.
≥This cannot be set when you have connected an external microphone or audio device.
VX3
[AUDIO INPUT SELECT]
VX3
You can connect an external microphone or audio device if you are using
.
Switch the audio setting for the MIC/LINE IN terminal to suit the input device that is connected.
MENU
: [RECORD SETUP] # [AUDIO INPUT SELECT] # desired setting
[MIC INPUT]:
Select when you connect an external microphone.
[LINE INPUT]:
Select when you connect audio equipment, etc., compatible with line
input.
- 90 -