Текст страницы
3
(When [Microphone Gain] is selected in Step 2)
Select an item.
[Normal]:
Adjusts the sound quality automatically.
[Attenuate]:
Records sounds of very loud scenes at appropriate volume.
(When [Frequency Response] is selected in Step 2)
Touch
/
to adjust.
≥Before recording, check the effect you have selected with a headphone set, etc.
≥The high frequency range (dB) and low frequency range (dB) can be adjusted.
≥If noises such as the sound caused by the wind bother you, set the low frequency range to
[LowCut].
(When [Directional] is selected in Step 2)
Select an item.
[SURROUND]/[STEREO]:
Records sounds with the setting of [MIC SETUP] ([SURROUND] or
[STEREO MIC]).
[MONO]:
Records sounds from all directions without setting specific
directivity.
4
Touch [EXIT].
≥
appears on the screen.
≥Depending on the recording condition or sound quality, the desired effect may not be achieved.
≥The setting becomes [Auto] when you have connected an external microphone or audio device.
≥(When [Music] or [Festival] is set)
The volume of the recorded sounds may be lower than that of the sounds recorded with [Auto].
≥(When [Speech] or [Nature] is set)
Sounds recorded with these effects are less realistic than those recorded with [SURROUND] or
[STEREO MIC] in [MIC SETUP].
[5.1ch/2ch]
You can switch the channel number setting of the built-in microphone.
≥Set [REC FORMAT] to [AVCHD]. (l 85)
MENU
: [RECORD SETUP] # [5.1ch/2ch] # desired setting
[5.1ch]:
Records with the 5.1ch.
[2ch]:
Records with the 2ch.
≥[2ch] will be selected in the following cases:
j When [REC FORMAT] is set to a setting other than [AVCHD]
j When you have connected an external microphone or audio device
- 92 -