Текст страницы
www.aeg.com
16
The light on the hood deactivates 2
minutes after deactivating the hob.
9. FLEXIBLE INDUCTION COOKING AREA
Incorrect cookware position:
WARNING!
Refer to Safety chapters.
9.1 FlexiBridge
The area on the left side can be
combined into two cooking zones with
different sizes, or into one large cooking
area. You may choose a combination of 4
sections which depends on the size of
the cookware you want to use. The
cooking zone indicators change
automatically and show the possible
combination.
9.3 FlexiBridge Big Bridge
mode
FlexiBridge Standard is the default mode
which activates automatically when you
activate the hob. Two cooking zones
operate independently.
Touch
to switch between the
FlexiBridge modes.
To activate the mode touch
until you
see the correct mode indicator . This
mode connects three rear sections into
one cooking zone. The front section is
not connected and operates as a
separate cooking zone. You can set the
heat setting for each zone separately.
9.2 FlexiBridge Standard
mode
This mode is active when you activate
the hob. It connects the sections into two
separate cooking zones. You can set the
heat setting for each zone separately.
Correct cookware position:
To use this mode you have to place the
cookware on the three connected
sections. If you use cookware smaller
Correct cookware position:
than two sections the
blinks on the
display and after 1 minute the zone
switches off.