Инструкция индукционная варочная поверхность AEG IAE84851FB

ENGLISH
17

Incorrect cookware position:

Incorrect cookware position:

9.4 FlexiBridge Max Bridge
mode

9.5 PowerSlide

To activate the mode touch
until you
see the correct mode indicator . This
mode connects all sections into one
cooking zone.

Correct cookware position:

This function allows you to adjust the
temperature by moving the cookware to
a different position on the induction
cooking surface. This function
automatically divides the left cooking
zones into three areas with different heat
settings. The hob detects the position of
the cookware and adjusts the pre-set
power level accordingly. You can place
the pot in the front, middle or rear
position. If you place the cookware at the
front you get the highest heat setting
(i.e. 9). To decrease it, move the
cookware to the middle (heat setting - 5)
or rear position (heat setting -1).

To use this mode you have to place the
cookware on the four connected
sections. If you use cookware smaller

than three sections the display shows
and after 1 minute the zone switches off.

Use only one pot with a
minimum bottom diameter
of 160 mm when you
operate the function.

1.
Touch
once.
2.
Scroll the Menu > Hob Functions to
select the function from the list.
•
If any of the left zones operates a
pop-up window appears asking
you to confirm whether or not you