Текст страницы
ENGLISH
21
Cooker hoods with the Hob²Hood
function
consumer website. The AEG cooker
hoods that work with this function must
have the symbol
.
To find the full range of cooker hoods
which work with this function refer to our
11. CARE AND CLEANING
WARNING!
Refer to Safety chapters.
11.1 General information
•
Clean the hob after each use.
•
Always use cookware with a clean
base.
•
Scratches or dark stains on the surface
have no effect on how the hob
operates.
•
Use a special cleaner suitable for the
surface of the hob.
•
Use a special scraper for the glass.
The printing on the flexible
induction cooking area may
become dirty or change its
colour from sliding the
cookware. You can clean the
area in a standard way.
otherwise, the dirt can cause damage
to the hob. Take care to avoid burns.
Use a special hob scraper on the glass
surface at an acute angle and move
the blade on the surface.
•
Remove when the hob is sufficiently
cool: limescale rings, water rings, fat
stains, shiny metallic discoloration.
Clean the hob with a moist cloth and
a non-abrasive detergent. After
cleaning, wipe the hob dry with a soft
cloth.
•
Remove shiny metallic
discoloration: use a solution of water
with vinegar and clean the glass
surface with a cloth.
•
The surface of the hob has horizontal
grooves. Clean the hob with a moist
cloth and some detergent with
smooth movement from left to right.
After cleaning, wipe the hob dry with
a soft cloth from left to right.
11.2 Cleaning the hob
•
Remove immediately: melted plastic,
plastic foil, sugar and food with sugar,
12. TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
12.1 What to do if...
Problem
Possible cause
Remedy
You cannot activate or oper-
ate the hob.
The hob is not connected to
an electrical supply or it is
connected incorrectly.
Check if the hob is correctly
connected to the electrical
supply. Refer to the connec-
tion diagram.