Текст страницы
Bracket installation
Use the screws provided with the equipment rack to mount the Switch on the rack and
tighten it.
Rack installation
2.1.3 Power on the Switch
The Switch is powered on by the 100-240 VAC 50/60 Hz internal high-performance power supply.
Please follow the next tips to connect:
AC Electrical Outlet:
It is recommended to use single-phase three-wire receptacle with neutral outlet or multifunctional
computer professional receptacle. Please make sure to connect the metal ground connector to the
grounding source on the outlet.
AC Power Cord Connection:
Connect the AC power connector in the back panel of the Switch to external receptacle with the
included power cord, and check the power indicator is ON or not. When it is ON, it indicates the
power connection is OK.
Connect Computer (NIC) to the Switch
Please insert the NIC into the computer, after installing network card driver, please connect one end
of the twisted pair to RJ-45 jack of your computer, the other end will be connected to any RJ-45 port
of the Switch, the distance between Switch and computer is around 100 meters. Once the
connection is OK and the devices are power on normally, the LINK/ACT/Speed status indicator lights
corresponding ports of the Switch.
Installation and Connection 6