Инструкция коммутатор Dahua DH-PFS4210-8GT-150

PC2:192.168.1.123, port 7, Trunk allowed VLAN 1-2

PC3:192.168.1.124, port 6, access VLAN1 (The default port belongs to VLAN1)

Can let the PC2 PING PC1, cannot PING PC3

Configuration example I

Configuration example II

4.3.4 Hybrid-port Setting

In the navigation bar, select VLAN config > hybrid-port setting, Can set the port to take the tag and
without the tag, the following picture:

Hybrid port settings

[Instructions]

Hybrid port to packet:

Receives a packet, judge whether there is VLAN information: if there is no play in port PVID,
exchanged and forwarding, if have, whether the Hybrid port allows the VLAN data into: if can be
forwarded, or discarded (untag on port configuration is not considered, untag configuration only
work when to send it a message)

Hybrid port to send packet:

Determine the VLAN in this port attributes (disp interface can see the port to which VLAN

untag, which VLAN tag).

If it is untag stripping VLAN information, send again, if the tag is sent directly.

[Configuration Example]

Such as: create vlans 10, 20, VLAN sets the Native VLAN port 1 to 10, to tag VLAN for 10, 20, sets the
Native VLAN port 2 to 20, to tag VLAN for 10, 20.

Switch Configuration 25