Текст страницы
position. Move and fasten the door hinge (4) with
• Connect the mains cable to a properly installed
the screws (3).
and earthed wall outlet.
• Replace the hinge cover (2) and move the blind
• If the plug after installation is not accessible, a
cap (1) into the exposed hole.
corresponding disconnect device must be availa-
ble to meet the relevant safety regulations.
Check that the door is optimally aligned both vertical-
ly and horizontally to ensure a smooth opening and
Reversing the door opening
closing of the door.
If required, the door opening can be moved from the
right (supplied condition) to the left side.
Startup / Operation
WARNING:
When replacing the door stop, the appliance must be
Prior to first use
disconnected from the power supply first.
CAUTION:
NOTE:
After transport, the appliance should be left standing
You possibly need: screw wrench, Phillips screwdriv-
upright for four hours before connecting to the power
er as well as a thin-blade screwdriver.
supply. Nonobservance could lead to malfunction of
the cooling system and causes an appliance break-
down.
Clean the appliance interior including all accessory
parts. Consider the instructions which we provide in
the chapter “Cleaning and Maintenance”.
Starting the appliance
• Connect the appliance to the power supply.
• Set the operating conditions. See also the follow-
• Remove the blind cap (1) and the hinge cover (2).
ing sections.
• Loosen the screws (3), remove the door hinge (4)
Settings
and lift the appliance door.
• Move the blind plug (5) of the appliance door to
Position [ OFF ] means that the appliance is in the
the opposite side. Set the door aside safely.
switched-off state. Turn the temperature control
• Tilt the appliance slightly backwards and block it
clockwise from this position, the appliance switches
in this position. Dismount the door hinge (6) with
on automatically.
its base by loosening the screws (7). Unscrew the
The power levels control the different values of the
separate foot (8).
internal temperature.
• Move and fasten the door hinge (6) incl. base with
Power level
the screws (7). Screw in the separate foot (8) ac-
lowest level, warmest internal tem-
cordingly.
MIN
perature → approx. -10°C ∼ -13°C
• Put the appliance back in the upright position. Put
medium level, optimal operating tem-
on the appliance door and fix it in the intended
NORMAL
perature → approx. -14°C ∼ -18°C
20