Инструкция пылесос Atvel DX2000

EN

Cleaning and maintenance

● Emptying the dust container

The dust container needs emptying when the dust container level reaches
the MAX line.

1. Turn off the vacuum cleaner and unplug it.
2. Grasp the dust cup handle and then press «Push» button on the dust
cup handle.
3. Press the dust cup latch to remove the cap.
4. Empty the tank and then assemble the dust tank as below.

«Push» button
Dust cup latch

Click

● Cleaning the dust container

1. Raise dust container cap, wash dust container and dust cap.
2. Dry fully in shade so that moisture is entirely removed.

NOTICE: If suction power decreases after cleaning the
dust container, clean the inlet air filter, the inlet motor safety filter and
additional inlet filter.

● Removing the inlet filters

1. Turn off the vacuum cleaner and unplug it.
2. Grasp the dust cup handle and then press «Push» button on the dust
cup handle.
3. Remove the inlet filters from under the container as below.
4. After cleaning of inlet filters, dry them fully in shade.
Install fully dry filters back into the vacuum cleaner.
Make sure that the filters fit snugly and that the
is positioned
inlet air filter
with uneven surface facing up (as below).

CAUTION

Inlet air filter

Inlet motor
safety filter

Additional
inlet filter

11