Текст страницы
EN EN Routine Maintenance
Routine Maintenance
Dust Bag
Dust Box and Filter
Washboard Base
1. Remove the dust tank cover and discard the dust bag.
1. Open the robot cover and press the dust box clip to remove the dust box.
Then remove the filter and tap its basket gently.
1. Enable the washboard base cleaning function in the app, and the robot
will exit the base station automatically. Take out the washboard and wait for
water to fill the bottom of the base station.
3. After a moment, the base station will automatically pump out the used
water. Then dry it with a soft and dry cloth, and put the washboard back into
place.
Note: Pulling upwards on the handle will seal the bag to prevent the dust and debris from
accidentally falling out.
Note: Do not attempt to clean the filter with a brush, a finger or sharp objects to prevent
damage.
2. Remove the dust and debris from the filter with a dry cloth.
2. Rinse the dust box and filter with water and dry them completely before
reinstalling.
24h
2. Rinse the washboard with clean water, and use a proper cleaning tool to
clean the bottom of the base station.
4. Use the app or briefly press the
button on the robot to make it return to
the base station.
3. Install a new dust bag and reinstall the dust tank cover.
Note:
• Rinse the dust box and filter with clean water only. Do not use any detergent.
• Use the dust box and filter only when they are completely dry.
Note: During cleaning, do not make the robot return to the base station.
12
13