Текст страницы
Document version: V1.2
1.2.2 Buttons and Ports
RX2 Pro is used as an example here.
IPTV/3, 2, 1, WAN, WPS/RST, POWER
The following table describes the functions of the buttons and ports on the back of the product.
The sequence of buttons and ports may differ. The actual product prevails.
Jack/Port/Button
Description
LAN/IPTV port.
IPTV/3
It is a LAN port by default. When the IPTV function is enabled, it can only serve as an
IPTV port to connect to a set-top box.
LAN port.
1, 2
Used to connect to such devices as computers, switches and game machines.
WAN port.
⚫ In the Router mode, this port is used to connect to a modem or the Ethernet jack for
WAN
internet access.
⚫ In the AP mode, this port functions as the LAN port.
⚫ In the Client+AP mode, this port cannot be connected to any device.
Used to start the WPS negotiation process, or to reset the router.
⚫ WPS: Through the WPS negotiation, you can connect to the Wi-Fi network of the
router without entering the Wi-Fi password.
WPS/RST
Method: Press the button, and the LED indicator blinks green fast. Within 2 minutes,
enable the WPS function of the other WPS-supported device to establish a WPS
connection.
⚫ Reset: When the router is working normally, hold the button down for about 8
seconds, and then release it when the LED indicator blinks orange fast. The router is
reset.
POWER
Power jack.
4