Текст страницы
Document version: V1.2
Online upgrade
To perform online upgrade on a single node:
Step 1
Log in to the web UI.
Step 2
Navigate to More > System Settings > Firmware Upgrade.
Step 3
Click Online Upgrade in the line of the node to be upgraded.
---End
Wait until the upgrade completes. Then, access the Firmware Upgrade page again and check
whether the upgrade is successful based on Current Firmware Version.
For better performance of the new firmware of the router, you are recommended to reset the router
to factory settings and re-configure the router after the upgrade completes.
Local upgrade
To prevent the router from being damaged:
Ensure that the firmware applies to the router.
When you are upgrading the firmware, do not power off the router.
Step 1
Go to www.tendacn.com. Download the applicable firmware of the router to your local
computer and unzip it.
Step 2
Log in to the web UI.
Step 3
Navigate to More > System Settings > Firmware Upgrade.
Step 4
Click Local Upgrade in the line of the node to be upgraded.
Step 5
Click Select File.
Step 6
Target the firmware file downloaded previously (extension: bin), and click Open.
Step 7
Click Upgrade.
---End
125