Текст страницы
Document version: V1.2
The following table describes the parameters displayed on this page.
Parameter description
Parameter
Description
LAN IP Address
Specifies the LAN IP address of the router, which is also the management IP
address for logging in to the web UI of the router.
Subnet Mask
Specifies the subnet mask of the LAN port, used to identify the IP address
range of the local area network.
DHCP Server
Used to enable or disable the DHCP server. Once enabled, the DHCP server
automatically assigns internet parameters such as IP address, subnet mask,
and gateway address to the terminal device. You are recommended to enable
this function.
Address Pool Range
Specifies the range of IP addresses that can be assigned to clients connected
to the router. The default range is 192.168.0.100 to 192.168.0.200.
Specifies the valid duration of the IP address that is assigned to a client.
Lease Time
When the lease time reaches half, the client will send a DHCP Request to the
DHCP server for renewal. If the renewal succeeds, the lease is renewed based
on the time of the renewal application. If the renewal fails, the renewal
process is repeated at 7/8 of the lease period. If it succeeds, the lease is
renewed based on the time of the renewal application. If it still fails, the client
needs to reapply for IP address information after the lease expires.
It is recommended to keep the default value.
Specifies whether to allocate another DNS address to the client. When it is
disabled, the LAN port IP address of the router is used as the DNS address of
the client. When it is enabled, Primary DNS must be set and Secondary DNS is
optional.
DNS
This router has the DNS proxy function.
Specifies the primary DNS address allocated to the client by the router.
Primary DNS
Make sure that the primary DNS server is the IP address of the correct DNS
server or DNS proxy. Otherwise, you may fail to access the internet.
Secondary DNS
Specifies the secondary DNS server address of the router used to assign to the
clients. It is optional.
Device Name
Specifies the name of the client.
Static IP
Reservation
List
IP Address
Specifies the IP address reserved for the client.
90