Текст страницы
Document version: V1.2
10.9.5 Remote web management
Overview
Generally, the web UI of the router can only be accessed on clients that are connected to the
router by a LAN port or wirelessly. When you encounter a network fault, you can ask for remote
technical assistance after enabling the remote web management function, which improves
efficiency and reduces costs and efforts.
To access the configuration page, log in to the web UI of the router, and navigate to More >
Advanced > Remote Web Management.
By default, this function is disabled. When this function is enabled, the page is shown below.
The following table describes the information displayed on this page.
Parameter description
Parameter
Description
Remote Web
Management
Used to enable or disable the remote web management function of the router.
Specifies the IP address of the host which can access the web UI of the router
remotely.
⚫ Any IP Address: Indicates that hosts with any IP address from the internet can
Remote IP Address
access the web UI of the router. It is not recommended for security.
⚫ Specified IP Address: Only the host with the specified IP address can access the
web UI of the router remotely. If the host is under a LAN, ensure that the IP
address is the IP address of the gateway of the host (a public IP address).
109