Текст страницы
Document version: V1.2
Step 5
Log in to the web UI of the router again, and navigate to Network Status to check whether
the router mode is configured successfully as shown below.
---End
10.3.2 AP mode
When you have a smart home gateway that only provides wired internet access, you can set the
router to work in AP mode to provide wireless coverage.
When the router is set to AP mode:
•
Every physical port can be used as a LAN port.
•
The LAN IP address of the router will be changed. Please log in to the web UI of the router by
visiting tendawifi.com.
•
Functions, such as bandwidth control and port mapping will be unavailable. Refer to the web UI
for available functions.
To switch the working mode to AP mode:
If you have finished the quick setup wizard before, start a web browser and visit tendawifi.com on a
connected client, then start from Step 3.
Step 1
Log in to the web UI.
Step 2
Navigate to More > Working Mode.
69