Текст страницы
Document version: V1.2
If you cannot access the internet, try the following solutions:
Ensure that the original router is connected to the internet successfully.
Ensure that your WiFi-enabled clients are connected to the correct Wi-Fi network of the router.
If the computer connected to the router cannot access the internet, ensure that the computer is
configured to obtain an IP address and DNS server automatically.
10.3.3 Client+AP mode
When there is already a router with internet access at your home, you can refer to the
configurations in this part to extend any type of Wi-Fi network.
To switch the working mode to Client+AP mode:
Some functions will be unavailable. Refer to the web UI for available functions.
If you have finished the quick setup wizard before, start a web browser and visit tendawifi.com
on a connected client, then start from Step 4.
Do not connect any device to the WAN port of the new router.
Step 1
Place the new router near the original router and power it on.
Step 2
Log in to the web UI of the new router.
Step 3
Navigate to More > Working Mode.
Step 4
Click Switch mode after Client+AP Mode.
Step 5
Click OK.
72