Текст страницы
Document version: V1.2
A static route is set by specifying the destination network, subnet mask, default gateway, and
interface. The destination network and subnet mask are used to determine a destination network
or host. After the static route is established, all data whose destination address is the destination
network of the static route are directly forwarded to the gateway address through the static route
interface.
To access the configuration page, log in to the web UI of the router, and navigate to More >
Advanced > Static Routing. A maximum of 10 static routes can be added here.
The following table describes the parameters displayed on this page.
Parameter description
Parameter
Description
Specifies the IP address of the destination network.
If Destination Network and Subnet Mask are both 0.0.0.0, this is the default route.
Destination Network
When no route of packets can be found under Routing Table, the router will
forward the packets using the default route.
Subnet Mask
Specifies the subnet mask of the destination network.
112