Текст страницы
Loiter setting interface
(1) Select the rule number, set the event as wandering, and check [Enable] to enable the rule.
(2) Draw a wandering detection area.
(3) Set the alarm time: indicate that an alarm will be triggered when the target is kept in the
wandering state in the picture for the time specified.
(4) Set the minimum area to indicate that the target's moving range (area percentage) in the
detection area will trigger the alarm when the area is reached.
(5) Set the sensitivity. The larger the value is, the more sensitive it is.
(6) Click save after setting.
[Event Type] = > [Behavior Analysis] = > [Running]
106