Текст страницы
specified conditions, and set the fill light.
[Color to B/W Type]: allows [device] to switch between day and night modes according to different
rules. Because the functions of different models are different, please refer to the actual interface.
[Auto(inside)]: in the internal synchronization mode, the [device] will automatically detect the
brightness of the video screen. When the video brightness is higher than the brightness value in the
day, the video will change from black to color. When the video brightness value is lower than the
brightness value at night, the video will change from color to black. The [real-time brightness value]
above the page is the detected current brightness value.
[B/W]: the device video is always in black and white mode.
[Color]: the device video is always in color mode.
[Auto(outside)]: detect the brightness of the external environment through the photoreceptor. When
the external brightness is higher than the brightness value in the day, the video changes from black to
color. When the external brightness is lower than the brightness value at night, the video changes
from color to black.
[Schedule]: in timing mode, you can specify the daylight time and dark time.
[Adaptive]: the device automatically switches between black and white or color mode according to
the scene.
[Sensitivity]: toggle the drop-down box to select sensitivity.
[IR lamp control mode]: set the IR lamp on mode.
[Brightness of IR lamp]: slide the slider to set the brightness value of IR lamp. The maximum value
is 100.
[White Light Control Mode]: set the white light on mode.
[Brightness of White Light]: slide the slider to set the brightness value of white light. The maximum
value is 100.
Click the [Save] button to save and make it take effect.
Click [Cancel] to restore the last saved parameter.
5.8.4. OSD
OSD - > OSD
81