Текст страницы
Vocaster Two user guide
To set the gain for either microphone preamp, select the input to be adjusted with its
gain button (a short
press). Speak into the microphone as if you were recording, adjusting the gain knob until the halo just starts to
turn amber when you speak at your loudest.
At this point, turn the knob down a bit until you don’t see any amber. If the halos ever turn red at the tops,
you will definitely need to turn the gain knob down: red means your recording is likely to distort. (See diagram
below.)
Good level.
A little too high.
Your recording will distort.
You can also adjust the gains from Vocaster Hub by moving the on-screen Mic Level sliders: drag them to the
right to increase the gain.
The Host and Guest inputs in Vocaster Hub
16