Текст страницы
Vocaster Two user guide
Recording a phone
You can connect a phone to Vocaster Two record a conversation, or to record music from the phone.
The rear panel has a phone connector, marked with a phone icon
. This is a 3.5 mm TRRS jack socket, use a
3.5mm TRRS jack cable to connect to the phone’s headphone socket, which is normally a 3.5 mm TRRS socket.
A 3.5mm TRS cable will work, but you may not get two-way communication with your phone guest.
If the phone does not have a 3.5 mm headphone port, you can use a 3.5 mm TRRS headphone adaptor.
The phone connector also feeds Vocaster Two’s output back to the phone so the person on the phone call can
hear the whole podcast mix, but without their own voice. This type of mix is known as ‘mix-minus’: it ensures
the caller will not hear their voice delayed or with echoes.
The signal level to the phone depends on the setting of the input channel sliders in Vocaster Hub's mixer. The
signal fed to the phone is a mono version of the stereo mix, because the phone’s input is a mono microphone.
21