Текст страницы
Vocaster Two user guide
Vocaster Two hardware features
Top Panel
Controls
• The large rotary control adjusts the gain for either microphone input, as selected by the Host and Guest
buttons. The gain control has two LED arcs. These have several functions.
The outer LED arcs surrounding the gain knob are ‘halo’ meters: the one on the left is for the Host
microphone input, the one on the right is for the Guest microphone input:
• They show microphone level: green means normal operation, amber shows the signal is close to
clipping, and red shows digital clipping, which should always be avoided.
• In addition, each arc pulses red when the corresponding microphone is muted
The thinner inner ring surrounding the gain knob is a multifunction ‘halo’ LED. This has several
functions:
• It illuminates white while microphone gain is being adjusted, to show the current gain setting
• It acts as a countdown timer during an Auto Gain calibration
• Following an Auto Gain calibration of either microphone preamp, it will flash green or red to
show a successful or unsuccessful operation.
Buttons
•
Host monitor output level control - sets the output level at both the front panel Host headphone
output and the rear panel speaker outputs.
31