Текст страницы
Vocaster Two user guide
Controlling the microphones
The Host Input and Guest Input panels are where you adjust Vocaster Two’s microphone channels:
The Mic Level displays for the two microphone inputs work identically. Each is both a level meter and a
level control. Click and drag a grey bar to adjust the gain. This control duplicates the rotary gain knob on the
interface, and you can adjust the gain with either control.
The colour bar shows the microphone signal level, and again, this duplicates the signal level halo display on
the interface.
The bar should remain green most of the time, with amber showing only on the loudest ‘peaks’. If it goes red,
the gain is set too high.
Below the meter/level display are three buttons which duplicate those on the interface top panel:
• Mute
– click on this to mute the microphone; the button and the level display show red when mute is
active. On the interface, the Mute and Auto Gain buttons light red and the relevant arc pulses red. Click
again to unmute.
• Enhance
– click on this to activate the Enhance feature; the on-screen and hardware buttons both
light green. Click again to deactivate.
• Auto Gain
– click this to start the Auto Gain function; speak normally into the microphone for 10
seconds to calibrate the gain setting.
27