Текст страницы
MY BOOK DUO
USER MANUAL
1. Open the WD Drive Utilities software by clicking either:
The WD Drive Utilities desktop shortcut icon if you created one when you
installed the application
Start > All Programs > Western Digital > WD Apps > WD Drive Utilities
See Figure 5 on page 10.
2. If you have more than one supported device connected to your computer, click the
icon of the one that you want to check.
3. Click Diagnostics to display the Diagnostics dialog:
4. On the Diagnostics dialog, click the button for the test that you want to run:
SMART Status
Quick Drive Test
Complete Drive Test
Erasing the Device Drives
CAUTION! Erasing the device drives permanently deletes all of the data on both drives
in RAID array configurations, and on the selected drive in JBOD configurations. Always
back up the data on the device drives before erasing them.
Note: Erasing your device drives also deletes the WD software and all of the
support files, utilities, and user manual files. You can download these to
restore your device to its original configuration after erasing the drives.
(See Knowledge Base answer ID 7 at http://support.wd.com for
information about downloading and restoring the WD software and disk
image.)
1. Open the WD Drive Utilities software by clicking either:
The WD Drive Utilities desktop shortcut icon if you created one when you
installed the application
Start > All Programs > Western Digital > WD Apps > WD Drive Utilities
See Figure 4 on page 9.
MANAGING AND CUSTOMIZING THE DEVICE – 48