Текст страницы
MY BOOK DUO
USER MANUAL
Checking the Device Status
The WD Drive Utilities software provides a status indication of the device configuration
and each device drive.
1. Open the WD Drive Utilities software by clicking either:
The WD Drive Utilities desktop shortcut icon if you created one when you
installed the application
Start > All Programs > Western Digital > WD Apps > WD Drive Utilities
See Figure 5 on page 10.
2. If you have more than one supported device connected to your computer, click the
icon of the one that you want to check.
3. Click RAID Management > RAID Status:
4. The status display shows:
Current Configuration as either:
- RAID 0 (Striped)
- RAID 1 (Mirrored)
- JBOD (Individual Drives)
RAID Status where:
This status indication . . .
Signifies that. . .
Cannot Access Data
The RAID disk array has errors and your data is
not accessible.
Data Lost Detected
The RAID disk array contains errors and the drives
have corrupted data.
Degraded
The RAID disk array is degraded but your data is
still accessible. Install a supported WD drive and
rebuild the RAID disk array.
Healthy
The RAID disk array is healthy. Your data is
accessible.
Not Configured
No RAID disk array has been created. Either one
or both drives are new.
Rebuild Failed
The RAID disk array could not be rebuilt but your
data is still accessible. Try rebuilding the array
again.
Rebuilding (x%)
The RAID disk array is rebuilding but your data is
still accessible.
(Continued)
MANAGING AND CUSTOMIZING THE DEVICE – 50