Текст страницы
MY BOOK DUO
USER MANUAL
Setting the Device Sleep Timer
The sleep timer turns off the power to your device after a certain period of inactivity to
conserve power and minimize long-term wear on the device drives.
1. Open the WD Drive Utilities software by clicking either:
The WD Drive Utilities desktop shortcut icon if you created one when you
installed the application
Start > All Programs > Western Digital > WD Apps > WD Drive Utilities
See Figure 5 on page 10.
2. If you have more than one supported device connected to your computer, click the
icon of the one that you want to set.
3. Click Sleep Timer to display the Sleep Timer dialog:
4. On the Sleep Timer dialog:
a.
In the Set Sleep Timer box, select the inactivity time interval at which you want
to turn off the device.
b. Click Set Timer.
Upgrading the Device Capacity
Increasing the capacity of your My Book Duo device by installing higher capacity drives
is as easy as one-two-three:
1. Use steps 1 through 9 of “Removing and Replacing the Drive” on page 63 to remove
both drives.
2. Use steps 10 through 16 to install the new drives.
3. Use the WD Drive Utilities software to confirm the New Drive status indication and
reconfigure the device. (See “Changing the Device Configuration” on page 51.)
Important: Only use WD Red™ or WD Green™ hard drives to upgrade the capacity of
your My Book Duo device. Also, both drives must be new, and have the same capacity
for RAID configurations. Using any other hard drive or mixed drive capacities voids the
warranty for your My Book Duo device.
MANAGING AND CUSTOMIZING THE DEVICE – 55