Текст страницы
MY BOOK DUO
USER MANUAL
7. Lift and loosen the thumbscrew that secures the drive hold-down plate and remove
the plate:
8. Using the pull tab, carefully lift the faulty drive out of the enclosure:
Note: Though the drives are labeled 1 and 2, it is their
enclosure locations that determine the drive
designations used by the WD Drive Utilities software.
As you view them from the front of the enclosure:
The drive in the . . . enclosure slot
Is drive . . .
Left
1
Right
2
Switching the drives from one enclosure slot to the
other would have no impact on the operation of your
My Book Duo device or the WD Drive Utilities
software. If you do that, just remember that regardless
of the label on the drive, the status and configuration
of:
“Drive 1” refers to the drive in the left enclosure slot
“Drive 2” refers to the drive in the right enclosure
slot
REPLACING A DRIVE – 64