Текст страницы
EN
RU
KK
Residual heat indicator
If symbol is flashing on the cooking zone
display, it means that the hob is still hot
and can be used to keep a small amount of
food warm. The symbol will soon turn to
symbol, which means it is less hot.
ð Selected cooking zone will operate
When the electricity is cut off, resid-
ual heat indicator will not light up
and does not warn the user against
hot cooking zones.
Adjusting the temperature level
with maximum power and “P” symbol
will appear on the cooking zone dis-
play. Cooking zone goes out of booster
and continues to operate at level.
1. Switch on the hob by touching
key.
2. Adjust the desired temperature level by
touching the zone
/
keys.
Switching off the high power setting
(BOOSTER) prematurely:
You can switch off the high power setting
anytime you want by touching the
or
key. Cooking zone goes out of booster and
continues to operate at level “9”.
ð The relevant cooking zone will start to
operate at the set temperature level.
Working principle of 2 zones which are
located same vertical direction:
If one zone is set to level booster and than
the other zone, which is located same ver-
tical direction set to bigger than level 6 (7, 8
and 9), first zone drops to level 9 and the
other zone can be set bigger than level 6 (7,
8 and 9). If the second zone is set to level
booster, first zone drops to level 6.
Cleaning lock
The cleaning lock prevents operation of all
keys on the control panel for 20 seconds
while the hob is switched on to allow the
user to make a short cleaning. Product will
not draw any power throughout this time.
Activating the cleaning lock
The outer section of the 280 mm in-
duction hob cooking zone (if your
product is equipped with a 280 mm
induction hob cooking zone) is ac-
tivated only when a saucepan large
enough to cover the cooking zone
is placed on the cooking zone and
the temperature is set to a level
higher than 8.
1. Touch and hold the
key until a
single signal sound is heard when any
cooking zone is switched on.
2. A countdown begins from 20 on the
High power setting (BOOSTER)
You can use booster function for rapid
heating. However, this function is not re-
commended for cooking a long time.
Booster function may not be available in all
cooking zones.
timer display of the hob. None of the
keys on the panel will function except
the
key throughout this period.
Selecting the high power setting
(BOOSTER):
1. Switch on the hob by touching
key.
2. Touch the
key of related zone.
EN / 16