Текст страницы
7.3 Cleaning the Control Panel
7.2 Cleaning the hob
EN
RU
KK
• When cleaning the panels with knob-con-
trol, wipe the panel and knobs with a
damp soft cloth and dry with a dry cloth.
Do not remove the knobs and gaskets un-
derneath to clean the panel. The control
panel and knobs may be damaged.
• While cleaning the inox panels with knob
control, do not use inox cleaning agents
around the knob. The indicators around
the knob can be erased.
• Clean the touch control panels with a
damp soft cloth and dry with a dry cloth.
If your product has a key lock feature, set
the key lock before performing control
panel cleaning. Otherwise, incorrect de-
tection may occur on the keys.
Glass cooking surface
Follow the cleaning steps described for the
glass surfaces in the “General cleaning in-
formation” section for the cleaning of glass
cooking surface. You may complete your
cleaning as per the information below for
special cases.
• Sugar-based foods such as dark cream,
starch and syrup should be cleaned im-
mediately, without waiting for the surface
to cool. Otherwise, the glass cooking sur-
face may be permanently damaged.
• Do not use cleaning agents for cleaning
operations you perform while the hob is
hot, otherwise permanent stains may oc-
cur.
8 Troubleshooting
If the problem persists after following the
instructions in this section, contact your
vendor or an Authorized Service. Never try
to repair your product yourself.
• Your pot may not be induction compat-
ible. >>> Check if your pot is suitable for
induction hobs.
• The pot may not be centered correctly on
the hob zone or the bottom surface of
the pot may not be wide enough for the
selected hob zone. >>> Center the hob
zone by selecting a pot that is wide
enough for the hob zone.
• The pot or the hob zone may be very hot.
>>> Wait for them to cool down.
The selected hob zone suddenly turns off
while it is working.
• The cooking time of the selected zone
may have expired. >>> You can set a new
cooking time or finish cooking.
• There is overheat protection. >>> Wait for
your hob to cool down.
• An object may be covering the touch con-
trol panel. >>> Remove the object from
the panel.
The product does not work.
• Fuse may be faulty or blown. >>> Check
the fuses in the fuse box. Change them if
necessary or reactivate them.
• The appliance may not be plugged to the
(grounded) outlet. >>> Check if the appli-
ance is plugged in to the outlet.
• (If there is timer on your appliance) Keys
on the control panel do not work. >>> If
your product has a key lock, the key lock
may be enabled, disable the key lock.
• If the hob does not turn on when the on/
off key is pushed >>> Unplug it and wait
at least 20 seconds before plugging it in.
• It has overheat protection. >>> Wait for
your hob to cool down.
• Appropriate pots may not be used. >>>
Check your pots.
The
symbol on the hob zone display is
constantly lit.
• There may not be a pot on the that hob
zone is operating. >>> Check if there is a
pot on the hob zone.
Even though the hob zone is turned on, the
pot does not heat up.
• The pot may not be compatible with the
induction hob. >>> Check if your pot is
suitable for the induction hob.
• The pot may not be centered correctly on
the hob zone or the bottom surface of
the pot may not be wide enough for the
EN / 24