Текст страницы
Activating the timer
EN
1. Switch on the hob by touching
key.
RU
2. Adjust the desired temperature level by
touching the zone
/
keys.
KK
Deactivating the timer
Once the set time is over, the hob will be
switched off automatically and give audible
signal sound. Press any key to silence the
audible signal sound. If you do not press
any key, the signal sound will be cancel
after a few minutes.
Deactivating the timers earlier
ü If you deactivate the timer earlier, the
hob will keep on operating at the set
temperature until it is switched off. You
can deactivate the timer earlier in two
different ways:
3. Activate the timer by touching the
1. Deactivating the timer for related zone
key. “00” symbol and decimal point of
selected zone will blink on timer display.
by dropping its value to “00”: Touch the
timer
/
4. Set the desired duration by touching the
timer
/
keys.
keys until “00” appears on
the display of the cooking zone whose
timer is active.
5. After 10 second, the setting will be activ-
ð Decimal point symbol of the re-
ated. Decimal point of selected zone will
blink on timer display.
lated zone will permanently goes
off and the timer will be canceled.
6. In order to set the timers of the other
ð Deactivating the timer for related
zone by touching the related zone
cooking zones, repeat the process ex-
plained above.
/
keys simultaneously: Touch
the related zone
/
keys simul-
taneously.
ð Decimal point symbol of the re-
lated zone will permanently goes
off and the timer will be canceled.
If more than one timer value are set
to different zones, the zone timer
which has minimum timer value is
displayed on the timer display and
the decimal point for that zone
blinks. The decimal points of the
other zones illuminate continu-
ously.
After this step, the temperature
level of the related zone will be “0”
also with the timer level.
Stop function
You can see the remaining cooking
time by touching the
ü You can decrase operating temperat-
ure level of the cooking zones to min-
imum level (level 1) by means of this
function.
key of all
cooking zone. For each touching,
different zone timer value is dis-
played. Finally, the minimum timer
value is displayed again.
If the timer is set for any cooking
zone, it will continue operating dur-
ing stoppage.
Timer cannot be set without select-
ing the cooking zone and its tem-
perature value.
1. Touch the
key when any of the cook-
ing zones is operating.
The timer can only be set for the
operating cooking zones.
EN / 18