Текст страницы
• Only install at a location with an ambient tempera-
• In case of damage, do not put the appliance into
ture suitable for the climate class of the appliance.
operation. Contact your distributor.
The climate class can be found under "Technical
NOTE:
Data" and on the rating label located in the interior
Production residue or dust may have collected on the
or on the appliance rear.
appliance. We recommend cleaning the appliance
• Place the appliance on a steady and safe surface.
according to chapter “Cleaning and Maintenance”.
If the appliance is not horizontally leveled, adjust
the feet accordingly.
Appliance Equipment
• Avoid the installation:
- near heaters, next to a stove, direct sunlight or
Appliance Overview
any other heat sources;
- at locations with high humidity (e.g. outdoors,
bathroom), as metal parts would be suscepti-
ble to corrosion under such circumstances;
- near volatile or flammable materials (e.g. gas,
fuel, alcohol, paint, etc.), in rooms which may
have poor air circulation (e.g. garages).
- Do not expose the appliance any weather.
Assembling the door handle
1 Temperature control
3 Feet
2 Freezing drawers
Delivery scope
3x freezing drawer, 1x ice cube tray, 1x door handle
Remove the cover caps from the door outer side and
incl. fixing screws with covers
tighten the handle with the delivered screws into the
underlying holes. Put the included screw covers on.
Installation
Leveling the appliance
Conditions for the installation location
Slight unevenness in the floor can be leveled out us-
ing the front feet.
• Good ventilation is required around the appliance
to dissipate the heat properly and to guarantee ef-
Check whether the appliance is leveled horizontally.
ficient cooling operation at low power consump-
If the appliance is not in balance, the feet must be
tion. Enough clearance is necessary.
adjusted.
- Gap to the back approx. 50～70 mm, to the
side walls and above the appliance each ap-
prox. min. 100 mm;
- Place the appliance so that the appliance door
can open without being impeded.
19