Текст страницы
EN EN Care & Maintenance
Care & Maintenance
Clean the Tube and the Dirt Sensor
Clean the Brush Assembly
Remove the used water tank and gently wipe the tube and the dirt sensor with a wet cloth.
1. Pull the handle to remove the roller brush.
2. Use the provided cleaning brush to clean
the roller brush, then rinse the roller brush
with clean water and dry it completely.
4. Use a coin to turn the locking knobs on the
roller brush cover to detach it.
3. Replacing the roller brush every 3 to 6
months is recommended. Remove the roller
brush handle to replace it with a new roller
brush, and press it firmly into place.
5. Wipe the suction inlet with a dry cloth or
wet tissue. Do not rinse it with water.
6. Re-install the roller brush and handle until
you hear a click. Re-lock the brush cover.
Dirt Sensor
Click
Note: Do not rinse the tube or the dirt sensor with water.
13
14