Текст страницы
pressed, pull outward to remove the
battery pack.
1.Illumination multi-surface brush
2.Vacuum body
3.Folding tube
Insert the charging plug of the power
4.Crevice nozzle and wide combination tool
adapter into the charging port of the
5.Wall mount
vacuum body for charging. The display
6.Water tank (with mop pad)
screen pack can be detached and
7.Motorized mini-brush
charged separately.
8.Accessory mount
During charging, the figure on the
9.Accessory kit (screw 2 + expansion tube 3)
display screen indicates the current
battery level in percentage, and when
the figure turns to “100”, the charging
is completed.
Vacuum Cleaner
1.Air outlet filter cover plate
Prompts
2.Display screen
3.Dust cup release button
Keep power off during charging, and
4.Folding tube release button
do not take out the battery pack when
5.Folding tube
connecting the vacuum body for
6.Floor brush release button
charging, which will take about 4.5
7.Floor brush
hours.
8.Switch button
For initial use, this product shall be
9.Battery pack release button
charged and discharged for 1-3 times,
10.Dust cup
so that the battery activity can be fully
11.Dust cup bottom cover release button
activated.
The socket of the power cord can be
adjusted according to the user's needs.
Water Tank (with mop pad)
1.Mop pad
2.Mop pad attachment area
3.Water dispenser hole
4.Water inlet
Used as a vertical vacuum
cleaner
Fig. A-3
Open the folding tube and straighten it.
Align the folding tube with the
illumination multi-surface brush
Installation and removal of battery pack
connector, and buckle it in place.
Align the battery pack with the rear end
Clip the suction end of the vacuum body
of the vacuum body, slide it inside, and
down into the connecting end of the
buckle it in place.
folding tube, and buckle it in place.
With the battery pack release button
3