Текст страницы
machine and the accessories shall be
function provided at the end of
stably placed.
illumination multi-surface brush. If the
illumination multi-surface brush is
wound or blocked, the preset protection
program will cut off the power supply,
Always use genuine parts to avoid
the illumination multi-surface brush will
voiding the warranty.
stop running, and the 3 capacity
If the filter is clogged, the vacuum
indicators will flash all the time. At this
cleaner will stop functioning shortly
point, please shut down the machine
after it is turned on. Please clean up the
immediately, remove the battery pack,
filter to restore the function.
check and clean the illumination multi-
surface brush, remove the blockage,
Before cleaning the dust cup, please
and then load back the battery pack
verify that the plug has been
and start the machine for reuse.
disconnected and the power button of
the vacuum cleaner has been left in the
Fig. D7
“OFF” position.
Wide combination tool
If the vacuum cleaner is not used for a
It can be used to vacuum the dust from
long time, please fully charge it, unplug
desktops, keyboards, sofa gaps,
the power cord, take out the battery,
household appliances, and other surfaces.
and store it in a cool and low -humidity
Fig. D8-D9
environment, avoiding direct sunlight.
To avoid excessive battery discharging,
Crevice nozzle
please charge the battery at least once
Applicable to cleaning dust at wall
every three months.
corners, gaps, door and window corners,
and shallow and narrow places.
Cleaning the vacuum cleaner
Fig. D10
Wipe the vacuum cleaner with soft, dry
Motorized Mini-Brush
cloth.
Used as a tool for cleaning household
carpets, sofa, mattresses, etc., an electric
motor with high-speed rotation can
quickly and effectively remove dust,
bacteria, mites and other dirt from
Clean the dust cup, air inlet
filter, and cyclone separator
assembly.
carpets and furniture surfaces.
1.Press the dust cup release button, and
Fig. D11
remove the cup from the vacuum cleaner.
2.Hold the separator, and rotate it
clockwise to remove it from the vacuum
Before installing and replacing
cleaner.
accessories, power off the vacuum
3.Remove the air inlet filter from the
cleaner.
cyclone separator.
This product cannot keep itself upright
4.Rinse the cyclone assembly, air inlet
without fixed support. For storage, the
filter, and dust cup until they are clean.
5