Текст страницы
EN EN Routine Maintenance
Routine Maintenance
Replace the Dust Collection Bag
It is recommended to replace the bag every 4-6 weeks.
Main Brush, Side Brush and Universal Wheel
Charging Contacts and Robot Sensors
Clean the charging contacts, robot sensors and the signaling area of the base
station with a soft, dry cloth:
1. Press the brush guard clips inwards to remove the brush guard and lift the
brush out of the robot.
- Discard the dust collection bag
- Install a new dust collection bag
2. Pull out the brush covers as shown in the diagram. Use a proper tool to
remove the hair tangled in the brush.
3. Remove and clean the side brush.
4. Use a tool such as a small screwdriver to separate the axle and tire of the
universal wheel. Do not use excessive force.
Laser Distance
Sensor (LDS)
Return-to-Base Sensor
1
Bumper
Cliff Sensors
Note: When taking out the dust collection bag, close the dust bag handle to
avoid dust leaking out.
- Wipe the filter with a dry cloth
- Close the upper cover of auto-empty base
Charging
Contacts
2
3
Signaling
Area
Charging
Contacts
4
Note: Do not close the base forcelly, if the upper cover of base cannot be
closed and the dust collection bag is not installed.
Note: Wet cloth can damage sensitive elements within the robot and the base
station. Please use dry cloth for cleaning.
14
15