Инструкция стиральная машина Bosch WGE03200BY

en Before using for the first time

3. Use a WAF 17 wrench to tighten

4.6 Aligning the appliance

the lock nuts against the housing
until they are hand-tight.

In order to reduce noise and vibra-
tion and to prevent the appliance
from moving, align the appliance cor-
rectly.
1. Use a WAF 17 wrench to loosen

the lock nuts in a clockwise direc-
tion.

In doing so, hold the foot tight and
do not adjust its height.

Before using for the first time 5 Before using for the

2. To align the appliance, turn the ap-

first time

Before using for the first timePrepare the appliance for use.

pliance feet. Check that the appli-
ance is level using a spirit level.

5.1 Starting an empty wash-

ing cycle

Your appliance was inspected thor-
oughly before leaving the factory. To
remove any residual water, run the
first wash cycle without any laundry.
1. Turn the programme selector to .
2. Close the door.
3. Pull out the detergent drawer.

All appliance feet must stand firmly
on the ground.

16