Текст страницы
Transportation, storage and disposal en
17.1 Emergency release
18.2 Inserting the transit
bolts
Releasing the door
Requirement: The drain pump is
empty. → Page 31
1. ATTENTION! Escaping water may
Secure the appliance before trans-
portation using transit bolts in order
to prevent transport damage.
1. Use a screwdriver to remove the 4
cover caps.
cause material damage.
▶Do not open the door if you can
see water through the glass.
Pull the emergency release down-
wards with a tool and release.
Keep the cover caps.
2. Insert the 4 transit bolts.
→ "Removing the transit bolts",
Page 13
a The door lock is released.
2. Insert the maintenance flap and
18.3 Using the appliance
again
lock it into place.
3. Close the maintenance flap.
▶For further information, see
Transportation, storage and disposal 18 Transportation, stor-
age and disposal
→ "Installation and connection",
Page 12 and
→ "Starting an empty washing
cycle", Page 16.
Transportation, storage and disposal
18.1 Removing the appliance
- Turn off the tap.
- Empty the water inlet hose.
- Unplug the appliance's mains plug.
- Drain the water.
→ "Cleaning the drain pump",
Page 31
5. Detach the hoses.
43