Текст страницы
en Troubleshooting
Troubleshooting 17 Troubleshooting
TroubleshootingYou can rectify minor faults on your appliance yourself. Read the troubleshoot-
ing information before contacting after-sales service. This will avoid unneces-
sary costs.
WARNING
Risk of electric shock!
Improper repairs are dangerous.
▶Never make any technical modifications to the appliance or its features.
▶Repairs to the appliance should only be carried out by trained specialist
staff.
▶Only use genuine spare parts when repairing the appliance.
▶If the power cord of this appliance is damaged, it must be replaced by the
manufacturer, the manufacturer's Customer Service or a similarly qualified
person in order to prevent any risk.
Fault
Cause and troubleshooting
The display goes out
and Start/Reload
flashes.
Energy-saving mode is active
▶Press any button.
a The display lights up again.
"E:30 / -80"
Drain pipe or water outlet hose is blocked.
▶Clean the drain pipe and the water outlet hose.
Drain pipe or water drain hose is caught or jammed.
▶Ensure that the drain pipe and water drain hose are
not kinked or trapped.
The water outlet hose is connected too high.
▶Install the water outlet hose at a maximum height of
1 metre.
Unapproved extension installed on the water drain
hose.
▶Remove any unapproved extensions from the water
hose.
→ "Connecting the appliance", Page 14
Drain pump is blocked.
▶Clean the drain pump. → Page 31
Pump cover is not correctly assembled.
▶Correctly assemble the pump cover.
The pump cap is not fully screwed in.
▶Ensure that the pump cap is screwed in all the way
into the appliance. The handle on the pump cap
must be in a vertical position.
Detergent dosage is too high.
34