Текст страницы
en Basic operation
13.6 Using the measuring aid
13.7 Adding detergent and
care product
Note: Observe the information about
detergents and care products
→ Page 26.
- Pull out the detergent drawer.
- If required, use the dosing aid.
→ Page 28
3. Pour in the detergent.
To more easily measure the liquid
detergent, you can use a measuring
aid in the detergent drawer.
Note: Do not use a measuring aid for
viscous detergents, for washing
powder, or when the prewash or pro-
gramme end time is activated.
Requirements
¡ The detergent drawer → Page 18
has been pulled out.
¡ The measuring aid is inserted.
→ "Detergent drawer", Page 18
4. If required, add the care product.
5. Push in the detergent drawer.
→ Page 27
1. Slide the measuring aid forwards.
13.8 Starting the programme
Requirement: A programme is set.
→ "Setting a programme", Page 27
▶Press Start/Reload
.
a The drum rotates and load detec-
tion takes place. This can take up
to 2 minutes, after which water
enters the drum.
a The display shows the programme
duration or the programme end
time.
a After the programme has ended,
2. Fold the measuring aid down and
the display shows: End.
click it into place.
13.9 Adding laundry
After the programme starts, you can
remove or add laundry depending on
the programme status.
1. Press Start/Reload
.
The appliance pauses.
Note: If you want to add laundry,
follow the instructions on the dis-
play.
→ "Display", Page 21
2. Open the door.
3. Add or remove laundry.
4. Close the door.
5. Press Start/Reload
.
28