Текст страницы
en Basic settings
3. Use the programme selector to se-
Basic settings 15 Basic settings
lect the required basic setting.
→ Page 30
4. To change the value, press Fin-
Basic settingsYou can configure the basic settings
for your appliance to meet your
needs.
ished in.
5. To save the changes, switch off
the appliance.
15.1 Overview of the basic
settings
Cleaning and servicing 16 Cleaning and servi-
cing
Cleaning and servicingTo keep your appliance working effi-
ciently for a long time, it is important
to clean and maintain it carefully.
1
2
3
4
5
16.1 Cleaning the drum
Programme selector with programme
positions
CAUTION
Risk of injury!
Permanently washing at low temper-
atures and a lack of ventilation for
the appliance may damage the drum
and cause injury.
▶Regularly run a programme for
cleaning the drum or wash at tem-
peratures of at least 60 °C.
▶Leave the appliance to dry after
every operation with the door
open, and leave the detergent
drawer to dry.
▶Run the programme without laun-
2
Set the volume of the signal
at the end of the programme:
0 (off) to 4 (very loud)
3
Set the volume of the signal
tone emitted when the but-
tons are pressed:
0 (off) to 4 (very loud)
5
Display the number of fin-
ished programmes.
15.2 Changing the basic set-
tings
dry but with washing powder that
contains oxygen bleach or a a
cleaning agent for caring for the in-
side of the appliance.
→ "Accessories", Page 26
1. Set the programme selector to po-
16.2 Cleaning the detergent
sition 1. → Page 30
2. Press Spin Speed and, at the
drawer
1. Pull out the detergent drawer.
same time, turn the programme
selector to position 2.
a The display shows the current
value.
30