Текст страницы
en Installation and connection
1. Remove the hose and the power
cord from the holders.
the cover caps in the four open-
ings for the transit bolts.
2. Unscrew and remove all of
the screws for the 4 transit bolts
using a WAF 13 wrench.
If one cover cap is included in
the scope of delivery, insert the
cover cap in the bottom left
opening for the transit bolt.
3. Remove the 4 sleeves.
Note: To install the transit bolts to
transport the appliance, perform
these steps again in the reverse or-
der.
4.5 Connecting the appliance
Connecting the water inlet hose
ATTENTION
Material damage may be caused if
the water inlet hose is connected in-
correctly.
4. Insert the cover cap and push it
Tighten the screw connections on
the water inlet until they are hand-
tight.
downwards.
Notes
Note the number of cover caps
included in the scope of delivery
If four cover caps are included
in the scope of delivery, insert
12