Текст страницы
en Basic settings
15.5 Resetting the appliance
network settings
1. Press and hold Remote Start for
approx. 3 seconds.
2. Press Remote Start repeatedly
until the display shows "rES".
3. Press and hold
Start/Reload for
approx. 3 seconds.
The network settings are reset.
15.6 Remote start
Enable the appliance for remote start
via the Home Connect app.
Note
Remote start will be deactivated in
the following circumstances:
The appliance door is opened.
Following a power cut.
stalled Wi-Fi communication mod-
ule).
Security certificate of the Wi-Fi
communication module (to ensure
a secure data connection).
The current software and hardware
version of your appliance.
Status of any previous resetting to
factory settings.
This initial registration prepares the
Home Connect functions for use and
is only required when you want to
use the Home Connect functions for
the first time.
Note: Please note that the
Home Connect functions can only be
utilised with the Home Connect app.
Information on data protection can be
retrieved in the Home Connect app.
Basic settings16 Basic settings
Activating remote start
Requirement: The appliance door is
closed.
Press Remote Start.
( Remote Start) lights up and
the appliance is enabled for re-
mote start via the Home Connect
app.
You can configure the basic settings
for your appliance to meet your
needs.
Note: You can also adjust the basic
settings in the Home Connect app.
Deactivating remote start
16.1 Overview of the basic set-
Press Remote Start.
( Remote Start) goes out.
tings
Note: Additional functions may be
available as a result of software up-
dates.
Page 29
15.7 Data protection
Please see the information on data
protection.
The first time your appliance is re-
gistered on a home network connec-
ted to the Internet, your appliance will
transmit the following types of data to
the Home Connect server (initial re-
gistration):
Unique appliance identification
(consisting of appliance codes as
well as the MAC address of the in-
30