Текст страницы
Transportation, storage and disposal en
Fault
Cause and troubleshooting
Odours have formed
in the appliance.
If you are not using the appliance, leave the door
and detergent drawer open so that residual water
can evaporate.
4. Drain the water.
18.1 Emergency release
"Cleaning the drain pump",
Page 33
5. Detach the hoses.
Releasing the door
Requirement: The drain pump is
empty.
Page 33
1. ATTENTION ‒ Escaping water
may cause material damage.
19.2 Inserting the transit bolts
Secure the appliance before trans-
portation using transit bolts in order
to prevent transport damage.
1. Use a screwdriver to remove the
Do not open the door if you can
see water through the glass.
Pull the emergency unlock down-
wards with a tool and release.
cover cap 1.
The door lock is released.
2. Insert the maintenance flap and
Retain the cover cap.
2. Insert the 4 transit bolts.
lock it into place.
3. Close the service flap.
19.3 Using the appliance again
Transportation, storage and disposal19 Transportation, stor-
age and disposal
For further information, see Install-
ation and connection
Page 10
and Starting an empty washing
cycle
Page 14.
19.1 Removing the appliance
19.4 Disposing of old appli-
- Turn off the tap.
- Put the appliance into standby
ance
Valuable raw materials can be re-
used by recycling.
mode.
Page 28
3. Unplug the appliance's mains plug.
1 The number of cover caps varies depending on the model.
41