Текст страницы
Basic operation en
4. If required, adjust the programme
13.5 Adding detergent and
settings.
Page 20
5. Start the programme.
Page 27
care product
Note: Observe the information about
detergents and care products
13.3 Opening the door
Page 26.
1. Grip under the door handle and
pull on the door.
- Pull out the detergent drawer.
- Pour in the detergent.
"Detergent drawer", Page 16
3. If required, add the care product.
4. Push in the detergent drawer.
13.6 Starting the programme
Requirements
2. Open the door.
13.4 Loading laundry
Note: To prevent creasing, note the
maximum load for the programmes.
Page 21
A programme is set.
Page 26
The door is closed.
Press
Start/Reload.
The drum rotates and load detec-
tion takes place. This can take up
to 2 minutes, after which water
enters the drum.
The display shows the programme
duration or the programme end
time.
After the programme has ended,
the display shows: "End".
Note: If you do not remove the laun-
dry once the programme has ended,
the crease-reduction function starts
after 15 minutes and takes approx.
30 minutes. The display shows
and a notification to cancel the pro-
gramme.
Press a button on the display to can-
cel the crease-reduction programme
and to remove the laundry.
Requirements
13.7 Adding laundry
After the programme starts, you can
remove or add laundry depending on
the programme status.
The laundry is prepared and sor-
ted.
Page 25
The drum is empty.
1. Open the door.
Page 27
2. Place the laundry in the drum.
3. Close the door.
Ensure that there is no laundry
trapped in the door.
1. Press
Start/Reload.
The appliance pauses.
Note: If you want to add laundry,
follow the instructions on the dis-
play.
Page 19
27